GENERAL EAST CO.,LTD info@trailerbull.com +86-531-59639518
Product Details
Place of Origin: China
Brand Name: GET VEHICLES
Certification: DOT
Payment & Shipping Terms
Minimum Order Quantity: 3 units
Price: $5,000.00 - $15,000.00/units
Packaging Details: CONTAINER
Supply Ability: 200 Unit/Units per Month
Use: |
Truck Trailer |
Type: |
Semi-Trailer |
Material: |
Steel |
Size: |
40 Ft |
Max Payload: |
30T |
Dimension: |
40ft |
Suspension System: |
Air Suspension Optional |
Axle: |
FUWA BPW |
King Pin: |
2"(50mm) Or 3.5"(90mm) JOST |
Brake System: |
WABCO |
Twist Locks: |
4 / 8 Sets |
Condition: |
Brand New |
Port: |
QINGDAO,CHINA |
Use: |
Truck Trailer |
Type: |
Semi-Trailer |
Material: |
Steel |
Size: |
40 Ft |
Max Payload: |
30T |
Dimension: |
40ft |
Suspension System: |
Air Suspension Optional |
Axle: |
FUWA BPW |
King Pin: |
2"(50mm) Or 3.5"(90mm) JOST |
Brake System: |
WABCO |
Twist Locks: |
4 / 8 Sets |
Condition: |
Brand New |
Port: |
QINGDAO,CHINA |
2 AXLE 40 FEET FLATBED SEMI TRAILER | ||||||
1. MODEL: | GET9302TJZP | |||||
This Flat bed semi trailer is designed for transporting a 40’ ISO container and two 20ft ISO Container meets all D.O.T., A.A.R., ANSI, T.O.F.C., FMVSS, SAE and TTMA specifications. | ||||||
2. GENERAL | ||||||
Overall Length | 41 ft | 12,390 mm | ||||
Overall Width | 8 ft | 2,490 mm | ||||
Overall Height | 5 ft | 1,550 mm | ||||
Fifth Wheel Height | 4 ft | 1,200 mm | ||||
Kingpin Location | 4 ft | 1,150 mm | From the rear face of the front bolster | |||
Landing Gear Location | 8 ft | 2,420 mm | From the kingpin center | |||
Axle Spread | 4 ft | 1,310 mm | ||||
Tandem Location | 26 ft | 7,900 mm | From Kingpin to Front Suspension Hanger | |||
Tare Weight | 15,440 Ibm | 7,000. kg | ||||
Payload | 66,140 Ibm | 30,000. kg | ||||
3. STEEL STRUCTURE AND COMPONENTS | ||||||
Main beam | Deep: 450 mm (17.7") Auto-welt Main Beam With High strength low alloy steel with 350 MPa yield hot-rolled I-beam, ASTM A572 Grade 50 or equivalent (Q345) | |||||
Flanges | Upper Flanges: 14mm (1/2 "), Lower Flanges: 16mm (2/3 ") High strength low alloy steel with 350 MPa yield hot-rolled I-beam, ASTM A572 Grade 50 or equivalent (Q345) | |||||
Flatbed Floor | 1/8" (3mm) Thickness ASTM A572 grade 50 Checked Steel Plate Options: 1/5" ( 5mm) | |||||
Upper coupler | 1/4” pick up plate with JOST 2” diameter square type king pin per SAE standard | |||||
Front Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 6'' high x 5/16 thick open section, 3/8'' top plate | |||||
Rear Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 7'' high x 5/16 thick open section, 3/8'' top plate | |||||
Rear Bumper | 100x100mm (4” x 4” ) square tube step with taper “H” section vertical member | |||||
Bar is welded to uprights and main beam. | ||||||
Twist lock | 8 Sets | 1x40ft Container and 2x20ft Container | ||||
Landing gear | 25T ( 55,000 lbs) capacity, 2-speed 19” travel with low “T” shoes | |||||
Crank handle is located on the driver’s side of the chassis. | ||||||
Suspension | mechanical tandem suspension with 3-leaf springs. Options: Air Suspension , Bogie Suspension | |||||
Axles | 150mm (6") Square axles with 13T (28,660lb) capacity, 1840mm (72.5” ) track, 420x 180mm (16.5”X7”) brake; TIMKEN bearing/seal, 37 spline, HALDEX 6.0” automatic slack adjusters, hub internally vented; 10 HUB piloted hubs with outboard mounting cast steel drum (ABS Options) Brake Type: Drum Brake ; Option : Disc Type Manufacturer: FUWA ,Options: BPW,SAF | |||||
Lubricant | Mobilith SHC007 synthetic grease lubricant with metal hubcap | |||||
Wheels | 22.5 x 8.25 hub-piloted wheels | |||||
Tires | 11R22.5-14PR tubeless type | |||||
Brake System | Dual air brake system, WABCO/HALDEX relay emergency valve, OPTIONS: ABS brake system | |||||
Phillips glad hand 12-0061 and 12-0081 and T30/30 stroke brake chamber | ||||||
3/8” blue air tube for control and 3/8” red for supply, 40L air tanks, meet FMVSS 121 | ||||||
Electrical | OPTRONICS 12-volt LED lighting with Phillips mold seal wiring harness, meet DOT and SAE standards. The proof design is used for 4” LED lighting. | |||||
Painting | Abrasive blast of all metal surfaces – not less than SA-2.5 to achieve clean bare steel Surface will be coated with marine paint of minimum 70% Zinc- Rich primer and true acrylic aliphatic urethane topcoat, color optional, total thickness not less than 80μm after dry membrane | |||||
MISC | GET standard marking, document holder, conspicuity tape, 24”x27” black rubber mud flaps | |||||
Option | Hubodometer, PSI tire inflation system |